I have a centos7 VM running under VMWare Player. I have changed the vmx file so that

tools.syncTime = "FALSE" 
time.synchronize.continue = "FALSE" 
time.synchronize.restore = "FALSE" 
time.synchronize.resume.disk = "FALSE" 
time.synchronize.shrink = "FALSE" 
time.synchronize.tools.startup = "FALSE" 
time.synchronize.tools.enable = "FALSE" 
time.synchronize.resume.host = "FALSE" 
rtc.startTime = "1463290457" 

And it works. The VM date at startup is in May 2016.

Several months later, I have created another VM of centos 7 under VMPlayer 12.5.2. Again changed the above and this time it starts with date set to now.

Does anyone have any ideas on how to debug this?

There is nothing in the VMware.log that I can see that is useful. The values in the vmx file are loaded.

Regards,

Hi, I'm new to VM.  I've allocated 500MB hard disk - and want to reduce this now to 50 instead - can someone please help me work out how to do this?  I'm happy to uninstall and reinstall everything if that is easy enough to do?

I'm using VM Workstation 12 Player.

Hello,

I have issue with smart card - it is electronic signature USD - miniLector S Evo by Bit4Id. I have host Ubuntu 16 64bit / VMWare PLayer 12 with Win7 32bit.

In Linux there is no problem with the card. I see it - I can use it. Unfortunately some local government agencies doesn't support Linux. So I try to install the card in Win 7. The issue is that the windows doesn't see it. The VM see it as shared devices. When I try to install it says "There is no card recognised by provider" - in normal instalation Win7 see the card.

What I did after that? I try that one, but it doesn't work http://pubs.vmware.com/player-12-linux/index.jsp#com.vmware.player.linux.using.doc/GUID-78E5618F-BD2D-4169-91A4-8FDDCD4C823B.html       

I try to make that one VMware Workstation 12 Player for Linux Documentation Center  with same result

When we run some test we got that result:
--- OS information ---
    Windows 7 (i386)

--- Connected known readers ---

--- Other connected USB devices ---
    USB Composite Device (0e0f:0003)
    Generic USB Hub (0e0f:0002)
    Microsoft Usbccid Smartcard Reader (WUDF) (0e0f:0004)

--- Connected smart cards ---

--- Installed smart card drivers ---
    Bit4id - miniLector (3.7)
    Bit4id - Universal MW 1.4.3.304 (1.4.3.304)
    Bit4id - Universal MW (Wrapped using MSI Wrapper from www.exemsi.com) (1.4.3.304)

--- Installed browsers ---
    Mozilla Firefox (45.0.1.5918)
    Google Chrome (51.0.2704.103)
    Internet Explorer (8.0.7601.17514)
    Opera Stable (38.0.2220.31)
    Default Host Application ()

--- Installed InfoNotary software ---
    InfoNotary Configurator for Mozilla (1.4.5)
    InfoNotary PNP Installer (1.5.2.0)
    InfoNotary Smart Card Manager (2.2.0)
    InfoNotary e-Doc Signer (1.5.8)
    InfoNotary Configurator for Mozilla (1.4.8)

--- Installed antivirus software ---

Also I try couple of times to connect and disconnect in different conditions - nothing.

Any idea what to do?

Thanks a lot.

Rumen

When i try to open maya 2017 vmware player hard locks.....

only way to get maya to open is disabling 3d acceleration... (maya shows warning with resetModelEditor.mel line 33 (im guessing trying to get DX11/OGL))

and i can't even reopen vmplayer without restarting my pc....

any fix for this?

My VMware application was corrupted (multiple times) and I had to force remove the application and all entrants of it. I used the KB article to remove all of the bits and pieces.

Now, I cannot connect to any USB devices with my VMs (any of them) and I get no errors that there is an issue.

Looking at my services.msc section, it shows USB Arbitration Service for VMware is "starting" but never actually starts. I found the log for the service and all it says is the below. I can't seem to get the service to start even after installing/reinstalling/removing/deleting the application or executables associated with the service. I could use some help in figuring out why I can't connect USBs or start this service.

2016-10-17T12:20:00.873-04:00| usbArb| I125: Log for VMware USB Arbitration Service pid=8112 version=12.5.0 build=build-4352448 option=Release

2016-10-17T12:20:00.873-04:00| usbArb| I125: The process is 64-bit.

2016-10-17T12:20:00.873-04:00| usbArb| I125: Host codepage=windows-1252 encoding=windows-1252

2016-10-17T12:20:00.873-04:00| usbArb| I125: Host is Windows 7 Enterprise, 64-bit Service Pack 1 (Build 7601)

2016-10-17T12:20:00.864-04:00| usbArb| I125: VTHREAD initialize main thread 3 "usbArb" host id 8116

2016-10-17T12:20:00.866-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\ProgramData\VMware): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.866-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\ProgramData\VMware\VMware USB Arbitration Service): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.866-04:00| usbArb| I125: DictionaryLoad: Cannot open file "C:\ProgramData\VMware\VMware USB Arbitration Service\config.ini": The system cannot find the file specified.

2016-10-17T12:20:00.866-04:00| usbArb| I125: PREF Optional preferences file not found at C:\ProgramData\VMware\VMware USB Arbitration Service\config.ini. Using default values.

2016-10-17T12:20:00.866-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\ProgramData\VMware): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.866-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\ProgramData\VMware\VMware USB Arbitration Service): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.866-04:00| usbArb| I125: DictionaryLoad: Cannot open file "C:\ProgramData\VMware\VMware USB Arbitration Service\settings.ini": The system cannot find the file specified.

2016-10-17T12:20:00.866-04:00| usbArb| I125: PREF Optional preferences file not found at C:\ProgramData\VMware\VMware USB Arbitration Service\settings.ini. Using default values.

2016-10-17T12:20:00.867-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\ProgramData\VMware): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.867-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\ProgramData\VMware\VMware USB Arbitration Service): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.867-04:00| usbArb| I125: DictionaryLoad: Cannot open file "C:\ProgramData\VMware\VMware USB Arbitration Service\config.ini": The system cannot find the file specified.

2016-10-17T12:20:00.867-04:00| usbArb| I125: PREF Optional preferences file not found at C:\ProgramData\VMware\VMware USB Arbitration Service\config.ini. Using default values.

2016-10-17T12:20:00.869-04:00| usbArb| I125: DictionaryLoad: Cannot open file "C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\config.ini": The system cannot find the file specified.

2016-10-17T12:20:00.869-04:00| usbArb| I125: PREF Optional preferences file not found at C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\config.ini. Using default values.

2016-10-17T12:20:00.869-04:00| usbArb| I125: PREF Disabling user preferences because disableUserPreferences is set.

2016-10-17T12:20:00.869-04:00| usbArb| I125: PREF Failed to load user preferences.

2016-10-17T12:20:00.869-04:00| usbArb| I125: POLL Using the WSAPoll API Implementation for PollDefault

2016-10-17T12:20:00.872-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\Windows): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.872-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\Windows\TEMP): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.872-04:00| usbArb| I125: FILE: FileCreateDirectoryRetry: Non-retriable error encountered (C:\Windows\TEMP\vmware-SYSTEM): Cannot create a file when that file already exists (183)

2016-10-17T12:20:00.873-04:00| usbArb| I125: Hostinfo_OpenProcessBits: OpenProcess access bits are 1000.

2016-10-17T12:20:00.883-04:00| usbArb| I125: DICT --- GLOBAL SETTINGS C:\ProgramData\VMware\VMware USB Arbitration Service\settings.ini

2016-10-17T12:20:00.883-04:00| usbArb| I125: DICT --- NON PERSISTENT

2016-10-17T12:20:00.883-04:00| usbArb| I125: DICT --- USER PREFERENCES

2016-10-17T12:20:00.883-04:00| usbArb| I125: DICT --- USER DEFAULTS C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\config.ini

2016-10-17T12:20:00.883-04:00| usbArb| I125: DICT --- HOST DEFAULTS C:\ProgramData\VMware\VMware USB Arbitration Service\config.ini

2016-10-17T12:20:00.883-04:00| usbArb| I125: DICT --- SITE DEFAULTS C:\ProgramData\VMware\VMware USB Arbitration Service\config.ini

2016-10-17T12:20:00.883-04:00| usbArb| I125: VMware USB Arbitration Service Version 15.2.0

2016-10-17T12:20:00.884-04:00| vthread-4| I125: VTHREAD initialize thread 4 "vthread-4" host id 8144

2016-10-17T12:20:00.884-04:00| vthread-4| I125: USBArb: Starting VMUSBArbService args:'VMUSBArbService'

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #0 hc= "\\?\HCD0"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #0 rootHubName="USB#ROOT_HUB20#4&b31d047&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #0 rootHubDevInst="USB\ROOT_HUB20\4&b31d047&0"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #1 hc= "\\?\HCD1"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #1 rootHubName="USB#ROOT_HUB20#4&981f5fc&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #1 rootHubDevInst="USB\ROOT_HUB20\4&981f5fc&0"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #9 hc= "\\?\HCD9"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #9 rootHubName="IUSB3#ROOT_HUB30#4&150db8e8&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBGW: Host controller #9 rootHubDevInst="IUSB3\ROOT_HUB30\4&150db8e8&0"

2016-10-17T12:20:00.888-04:00| vthread-4| I125: USBArbW: Connected to HCMON version 3.16

2016-10-17T12:20:00.910-04:00| vthread-5| I125: VTHREAD initialize thread 5 "vthread-5" host id 8156

2016-10-17T12:20:00.910-04:00| vthread-5| W115: USBArbW: Error setting autoconnect flag: A device attached to the system is not functioning (31)

[ENGLISH]

Hello,

how must I add VMware to the Windows-Firewall to allow the VM to communicate externally / internally ?

(↓ Better configuration ↓)

I add port 80 and 443 on the hostsystem (outgoing and incoming) but the VM don't use this ports. Although they also use ports 80 and 443. This is the case with every port.

How do I make the VMs use the ports?

The VM are NAT

------------------------------------------------

------------------------------------------------

[GERMAN]

Hallo,

Wie füge ich VMware in der Windows-Firewall hinzu, damit die VM nach außen und innen kommunizieren können?

(↓ Bessere Konfiguration ↓)

Ich habe am Hostsystem Port 80 und 443 (ausgehend und eingehend) hinzugefügt, aber die VM nutzen diese Ports nicht, obwohl sie auch die Ports 80 und 443 verwenden. Das ist bei jedem Port der Fall.

Wie bringe ich die VM dazu, dass sie die Ports nutzen?

Die VM sind ge'NAT'et

Hello,

I was using a virtual machine then I suspended it. Now I'm trying to use it again and it keeps showing this error.

The others virtual machines I have doesn't returns this error.

Some things I've tried already and didn't work:

- Rename the vmplayer.exe file;

- Restart vmware services;

- Restart windows management instrumentation service;

- Tried to delete .lck file (couldn't find it inside the folder);

Someone has any other suggestion for me to try?

Thanks

Almost the same thing as a few years ago happened:

server 1.0.10 NAT: DNS not working

xerces8 wrote (Nov 2, 2009 1:40 PM):

 

I just updated VMWare Server from 1.0.9 to 1.0.10 and now DNS does not work in guest that have set up NAT networking.

 

Tried Ubuntu 9.04 and 9.10, also Windows XP. All using default (automatic) network settings.

 

I can ping any numerical address, but DNS resolution does not work.

If I set manually a DNS server offered by my ISP in the guests, then it works.

 

Is this some regression with 1.0.10 ? I'm sure the same VM worked before the update.

 

Regards,

David

This time I was using VMWare Player 5.0.2 on Windows 8 Pro 64 bit.

I had a few VMs working fine.

Then I updated to Player 6.0.0, created a new VM for Windows8 and installed Windows 8.1 Preview into it.

There I noticed tha DNS does not work;

- ping 8.8.8.8 (Google's DNS server) - works

- nslookup www.najdi.si returns:

C:\Users\stein>nslookup www.najdi.si
Server:  UnKnown
Address:  192.168.91.2

Name:    www.najdi.si.localdomain
Addresses:  89.143.229.238

- ping www.najdi.si gives:

Ping request could not find host www.najdi.si. Please check the name and try again.

- ipconfig /all output:

C:\Users\stein>ipconfig /all

Windows IP Configuration

  Host Name . . . . . . . . . . . . : clearblue  Primary Dns Suffix  . . . . . . . :  Node Type . . . . . . . . . . . . : Hybrid  IP Routing Enabled. . . . . . . . : No  WINS Proxy Enabled. . . . . . . . : No  DNS Suffix Search List. . . . . . : localdomain

Ethernet adapter Ethernet0:

  Connection-specific DNS Suffix  . : localdomain  Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connectio
n  Physical Address. . . . . . . . . : 00-0C-29-7A-CD-FB  DHCP Enabled. . . . . . . . . . . : Yes  Autoconfiguration Enabled . . . . : Yes  Link-local IPv6 Address . . . . . : fe80::8c9b:97f9:f57a:3e7c%5(Preferred)  IPv4 Address. . . . . . . . . . . : 192.168.91.128(Preferred)  Subnet Mask . . . . . . . . . . . : 255.255.255.0  Lease Obtained. . . . . . . . . . : 22. september 2013 3:17:54  Lease Expires . . . . . . . . . . : 22. september 2013 3:47:53  Default Gateway . . . . . . . . . : 192.168.91.2  DHCP Server . . . . . . . . . . . : 192.168.91.254  DHCPv6 IAID . . . . . . . . . . . : 83889193  DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-CF-F0-F8-00-0C-29-7A-CD-FB  DNS Servers . . . . . . . . . . . : 192.168.91.2  Primary WINS Server . . . . . . . : 192.168.91.2  NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.localdomain:

  Media State . . . . . . . . . . . : Media disconnected  Connection-specific DNS Suffix  . : localdomain  Description . . . . . . . . . . . : Microsoft ISATAP Adapter  Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0  DHCP Enabled. . . . . . . . . . . : No  Autoconfiguration Enabled . . . . : Yes

A Ubuntu guest VM also had problems with DNS resolution (worked fine before), so I decided to revert back to Player version 5.0.2.

It did not help, so I uninstalled it, cleaned up ( "Manually cleaning a Windows system" at VMware KB: Cleaning up after an incomplete uninstallation on a Windows host ) and then reinstalled Player v5.0.2.

After that a quick test with http://www.sysresccd.org ISO worked, but when I tried the Windows 8.1 VM the problems started again.

I started the SystemRescueCd again and I got:

% ping rtv.si
PING rtv.si.localdomain (91.185.213.134) 56(84) bytes of data.
64 bytes from 91.185.213.134: icmp_seq=1 ttl=128 time=13.1 ms
64 bytes from 91.185.213.134: icmp_seq=2 ttl=128 time=13.9 ms

This is slightly better, but still not correct (it should say "PING rtv.si" , not "PING rtv.si.localdomain").

It seems the DNS server of VMWare Player is sending broken replies.

Any idea how to resolve this?

I recently upgraded to the latest VMWare Player from quite an older version and notice that now when I display in full screen mode where I used to get the Windows 7 taskbar along the bottom of the screen now it is missing and is black

How can I recover this

Many thanks

Mike

Hello,

I am running windows 10 and I don't have a ISO file or a CD that contains windows 10 is there a way to use the same os as my pc on VMware Player ?

Hello,first off all Merry Christmas to all and Happy new Year!

In Windows:

When we use drag and drop feature it makes first one copy of desired file into folder VMwareDND that is located in Appdata->Temp folder.After that, vmware copy the file to the final location.

-My question is:

Is it possible to change the location of this folder to another hard drive or force vmware to do direct copy?

Cheers!

Assume I created a Linux (Mint) guestOS with newest VMware Workstation player under 64bit Win 7 hostOS.

Now I can adjust the display resolution inside the Linux system for the general desktop after Login.

However this screen resolution is NOT applied to the first (after boot) Welcome screen (where the user enters username and password).

Here it is always a small minimum screen resolution.

How can I adjust here (= for WELCOME screen) the display resolution to another value?

Matt

I have installed Workstation Player 12.5 on a Windows 10 machine.  I have not been able to install an operation system.  When I created a new VM and set the CD to an ISO file, the VM tries to boot from the network skipping over the CD/ISO file even if I have the CD as the first boot device in BIOS.  Any suggestions?  I have tried with three separate systems, Win 98 OEM, Win 98 Retail and Win98SE OEM.  All iso images are bookable discs.

Any ideas?

Fresh install of Debian 8.6.0 KDE starts with a 640x480 display which changes during boot to 800x600. Physical hardware is Asus P8Z77-M Pro motherboard with i7-3770 CPU, 32 GB Ram, 2x2TB Disk, Samsung S27B970D Display at 1920x1024, running 64-bit Windows 10 Pro. 

How to configure the resolution of the Debian Virtual Machine?

I am running Win XP Pro guest on a Win 10 Host.  All host printers (and everything else) works fine on version 12.1.1 build-3770994. After upgrade to 12.5.0 all the virtual printers disappeared.  I have tried everything I can think of including removing and reinstalling the software and generating a new virtual machine, but the printers stay gone. When I restore Vmware from a backup to the 12.1.1 version, it works fine again. Am I locked into using v.12.1.1 forever?

The host PC has a high speed serial card fitted ("Brainboxes" RS422/485 PCi), plus its respective driver software. In Control Panel -> Device Manager the card's two serial ports appear as "Brainboxes RS422/485 Serial Port (COM8)" and "Brainboxes RS422/485 Serial Port (COM9)". They work fine when I talk to them from the host PC.

I now need to talk to the com ports from the guest machine. I've configured the VM's settings to expose these serial ports, and on the guest machine (Win7) I can see them in Control Panel -> Device Manager, appearing as COM2 and COM3. Unfortunately my software is unable to talk to them, failing to open the serial port. The error message is "The parameter is incorrect", which I believe is due to using a high baud rate (921600) which isn't supported by "vanilla" com ports - hence the need for the Brainboxes driver.

I installed their driver on the guest machine, then tried to update the two com ports (COM2 & COM3) with this driver. However the guest PC crashes at this point with a blue screen of death. Occasionally it will update the driver, but when I restart the PC I get the blue screen again and have to run a Windows repair to rollback the driver installation. Any thoughts?

Can I create a virtual operating system that only works on a PC? I do not want that a user can have a virtual operating system on 1000 different computer copying vmware files into others PC. Can I use VMware Workstation Player for this purpose, or should I use the Pro version? Do you have an Italian guide for my problem?

Right now I'm using VirtualBox, but it does not have this specific function so I'm thinking to migrate to VMware.

Thank you and I am sorry for my English

Giampiero

Hello,

I'm trying to run a VMware Conversion of an old laptop as a backup. I've run a VMware conversion and converted it to a vm 9 image file.

When it gets opened in VMware Player everything works except for the keyboard inputs. The only way I can type on the screen is using either the on screen keyboard or connecting in with TeamViewer.

Looking in Device Manager shows that the following error.

Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

Has anyone come across this before and know if a solution?

Thanks

Peter Sheridan

Guten Morgen,

kann mir jemand schreiben, wie ich den VMware Player wieder deinstalliere?

Vielen Dank.

Claus

After installing Vmware Player on a Windows 7 x64 (HP Z440) the hosts NIC disconnects randomly and stays disconnected for about 5-10 minutes, then it comes back online and stays online for just a minute or so Before it disconnects again.

In the event log I see event id 27

Source: e1dexpress

Intel(R) Ethernet Connection (2) I218-LM

Network link is disconnected.

If I disable the VMware Network Adapters It works fine but as soon I enable them again I start getting the disconnects again.

Has anyone seen this before?

Do I need to configure the hosts NIC in some way?

Or the VMware NIC maybe?